Metallic Silver Breaking Free Dunny: Handling and Display Guide

Quick answer

Display the metallic silver Breaking Free 8-inch resin Dunny on a stable, level shelf away from direct sun and heavy foot traffic, and handle it only with clean, dry hands or nitrile gloves. Dust it with a soft brush or dry microfiber cloth—never solvent cleaners—and keep the original packaging for storage or resale.

Step-by-step handling and display routine

1. Unbox on a soft, clear surface: Work on a clean table covered with a microfiber cloth or soft towel. Open the packaging slowly and lift the figure by its base, not by the protruding parts of the sculpt. Common mistake: unboxing over a hard floor, where a slip can chip a resin edge. Keep the box, inserts, and any certificate in a dry, flat place from day one.
2. Handle with clean, dry hands or gloves: Wash and dry your hands before touching the figure, or wear nitrile gloves. Avoid lotions, hand sanitizer residue, and oily fingers, which transfer directly to a metallic finish. Checkpoint: if you can see a smudge after handling, stop and gently buff with a dry microfiber cloth before continuing.
3. Choose a stable, level shelf: Place the figure on a solid shelf that does not wobble, at least a few inches from the shelf edge, and away from doors, walkways, and pets. Common mistake: putting it on a high-traffic shelf or a floating ledge where vibration and bumps are likely. Test the shelf by pressing gently near the figure's spot; if it moves, relocate.
4. Control light and humidity: Keep the figure out of direct sunlight and away from radiators, humidifiers, and kitchen steam. Indirect room light is fine. Checkpoint: if the display spot gets strong afternoon sun, move it or add a UV-filtering case.
5. Dust gently on a schedule: Use a soft brush or dry microfiber cloth once every few weeks in open displays. Never use glass cleaner, alcohol, acetone, or abrasive pads on the metallic surface. Common mistake: spraying cleaner onto the figure instead of the cloth—avoid sprays entirely. If a mark won't lift with a dry cloth, stop rather than scrubbing.
6. Store or transport in the original packaging: When rotating the display, return the figure to its original box and inserts, and store it flat in a dry, temperature-stable place. For transport, pad the box rather than wrapping the figure directly. Checkpoint: confirm the figure cannot shift inside the box before moving it.

Product facts

• DCON 2022: Breaking Free 8" Resin Dunny by WHATSHISNAME - Metallic Silver Edition (Limited Edition): This is an 8-inch resin Dunny collaboration between Kidrobot and London-based artist WHATSHISNAME, released as a limited metallic silver edition. The 8-inch resin scale and limited edition status make stable placement and original-packaging retention the two priorities for long-term ownership.